IBM Storwize V5030 User Manual

Chapter 2. Initial configuration 55
Figure 2-20 System Initialization: Restarting Web Server
10.After you complete the initialization process, disconnect the cable between the personal
computer and the technician port as instructed in Figure 2-21. Reestablish the connection
to the customer network and click Next to be redirected to the management address that
you provided to configure the system initially.
Figure 2-21 System initialization: Completion summary
2.10 Initial configuration
This section describes how to complete the initial configuration, including the following tasks:
򐂰 System components verification
򐂰 Email event notifications
򐂰 System name, date, and time settings
򐂰 License functions
򐂰 Initial storage configuration
򐂰 Initial configuration summary

IBM Storwize V5030 Specifications

General

Model	IBM Storwize V5030
Category	Storage
Controller Enclosures	1 or 2
Maximum Drives	240
RAID Levels	0, 1, 5, 6, 10
Virtualization	Yes
Data Compression	Yes
Maximum Hosts	512
Form Factor	2U
Drive Types	SAS, NL-SAS, SSD
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI, 12 Gb SAS
Processor Cores	8 per controller