IBM Storwize V5030 User Manual

Chapter 10. Copy services 617
4. Click Actions → Start to start the remote copy process, as shown in Figure 10-132.
Figure 10-132 Starting the remote copy process
5. After the task is complete, the remote copy relationship status has a Consistent
Synchronized state, as shown in Figure 10-133.
Figure 10-133 Consistent Synchronized remote copy relationship
10.10.9 Starting remote copy Consistency Group
All of the mappings in a Consistency Group are brought to the same state. To start the remote
copy Consistency Group, complete the following steps:
1. From the main navigation pane, select Copy Services → Remote Copy.
2. Select the Consistency Group that you want to start, as shown in Figure 10-134.
Figure 10-134 Remote Copy Consistency Groups view
3. Click Actions → Start (Figure 10-135) to start the remote copy Consistency Group.
Figure 10-135 Start action Figure 4
Tip: You can also right-click a relationship and select Start from the list.

IBM Storwize V5030 Specifications

General

Model	IBM Storwize V5030
Category	Storage
Controller Enclosures	1 or 2
Maximum Drives	240
RAID Levels	0, 1, 5, 6, 10
Virtualization	Yes
Data Compression	Yes
Maximum Hosts	512
Form Factor	2U
Drive Types	SAS, NL-SAS, SSD
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI, 12 Gb SAS
Processor Cores	8 per controller