530 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
3. Click Actions → Create Clone, as shown in Figure 10-33.
Figure 10-33 Create Clone option
4. A volume is created as a target volume for this clone in the same pool as the source
volume. The FlashCopy mapping is created and started. You can check the FlashCopy
progress in the FlashCopy mappings option or by clicking on to the Tasks → Running
Tasks from the main pane. After the FlashCopy clone is created, the mapping is removed
and the new cloned volume becomes available, as shown in Figure 10-34.
Figure 10-34 Clone created and FlashCopy relationship removed
10.4.4 Single-click backup
The backup creates a point-in-time replica of the production data. After the copy completes,
the backup view can be refreshed from the production data, with minimal data copied from the
production volume to the backup volume. The backup preset uses the following parameters:
Background Copy rate: 50
Incremental: Yes
Delete after completion: No
Cleaning rate: 50
Primary copy source pool: Target pool
To Next Page
Loading...
Need help?
General