IBM Storwize V5030 User Manual

Chapter 8. Advanced host and volume administration 395
Figure 8-29 Host port definitions
Click Close to close the Host Details panel.
8.2 Adding and deleting host ports
In this section we describe how to add and delete port(s) to and from a host definition. The
examples shown here are for Fibre Channel ports, but the steps shown are equally applicable
for SAS and iSCSI ports as well.
Note: You can also add additional ports for the host using this window.

IBM Storwize V5030 Specifications

General

Model	IBM Storwize V5030
Category	Storage
Controller Enclosures	1 or 2
Maximum Drives	240
RAID Levels	0, 1, 5, 6, 10
Virtualization	Yes
Data Compression	Yes
Maximum Hosts	512
Form Factor	2U
Drive Types	SAS, NL-SAS, SSD
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI, 12 Gb SAS
Processor Cores	8 per controller