IBM Storwize V5030 User Manual

546 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
3. Click Actions → Delete, as shown in Figure 10-66.
Figure 10-66 Delete Consistency Group action
4. The Warning window opens, as shown in Figure 10-67. Click Yes.
Figure 10-67 Warning window
10.4.15 Starting FlashCopy process
When the FlashCopy mapping is created, the copy process can be started. Only mappings
that are not members of a Consistency Group can be started individually. Complete the
following steps:
1. From the main panel, click Copy Services → FlashCopy Mappings.
2. In the table, choose the FlashCopy mapping that you want to start.
3. Click Actions → Start (as shown in Figure 10-68) to start the FlashCopy process.
Figure 10-68 Start the FlashCopy process action
Tip: You can also right-click a FlashCopy mapping and select Start.

IBM Storwize V5030 Specifications

General

Model	IBM Storwize V5030
Category	Storage
Controller Enclosures	1 or 2
Maximum Drives	240
RAID Levels	0, 1, 5, 6, 10
Virtualization	Yes
Data Compression	Yes
Maximum Hosts	512
Form Factor	2U
Drive Types	SAS, NL-SAS, SSD
Host Interface	8 Gb FC, 16 Gb FC, 10 Gb iSCSI, 12 Gb SAS
Processor Cores	8 per controller