Auto Sentry® flex User Manual 101 Service Unit Screen
3 Have a bag or bucket ready to collect the coins, if necessary.
4 Tap Verify, and then tap Start.
5 Tap Stop when the hopper is empty.
6 Count the number of coins.
If the amount is correct:
▪ Tap Stop. Ending Bank Unchanged appears in the instruction box. No receipt is printed.
If the amount is not correct:
▪ Tap Edit, and then enter the correct amount.
▪ Enter the total number of coins, not the dollar amount. The system will calculate the dollar
amount for you.
▪ Tap Stop to finish.
▪ Ending bank has been adjusted by… appears in the instruction box.
▪ Take the receipt.
Part Two: Enter the Remove Command
7 Tap the same coin hopper or coin token hopper icon you selected in step 1 above.
8 Tap Remove.
9 Tap Start.
A message appears in the information box. For example, 100 coins removed from Hopper 1
(coin value = $0.25).
Terminal Operations
Close Terminal - Auto Sentry
IMPORTANT: If the user closes the terminal with the Close Terminal button on the
Auto Sentry® flex, they will need to use the Open Terminal button on the Auto
Sentry® flex to open the machine the next day or they will not be able to process
sales on that machine.
To Next Page
Loading...
General