ICS Auto Sentry flex - Flex-Serve Facilities Without the Safe; Figure 1. Auto Sentry with Safe, Two Different Setups

Auto Sentry® flex User Manual 23 Introduction
Figure 1. Auto Sentry with Safe, two different setups
If the Auto Sentry® flex is configured to use the safe, then you cannot bump a shift at the Auto
Sentry® flex.
Flex-Serve Facilities Without the Safe
Your Auto Sentry® flex can be configured to not use the safe at all. If this is your preference, then
the safe must also be disabled for the Touch POS and Touch IT devices at your site. This is known
as the "Bump Shift" option because it gives you the ability to bump, or create a new shift at the
Auto Sentry® flex.
 This setup is convenient for customers who utilize an armored car company to service the cash
at the Auto Sentry® flex.
VIRTUAL SAFE VIRTUAL SAFE
POS POS
TOUCH IT TOUCH IT
FLEX FLEX
POS & TOUCH IT WITH VIRTUAL SAFE | FLEX WITH VIRTUAL SAFE POS & TOUCH IT WITHOUT VIRTUAL SAFE | FLEX WITH VIRTUAL SAFE
X
X