Auto Sentry® flex User Manual 99 Service Unit Screen
5 Tap Enter to confirm. The amount is added and the instruction box confirms the transaction.
The quantity is displayed on the bill dispenser icon.
6 Take the receipt.
7 Slide out the bill dispenser drawer. Physically add bills, and then slide the drawer back.
Verify Coin Hoppers
To audit the coin totals in the Auto Sentry® flex for accuracy, the Service Unit Screen provides a
Verify function. This function dispenses all of the coins held within a selected hopper, and then
reports the total quantity. This total quantity can be used to verify the quantity or dollar-coin
amount currently represented in the selected hopper.
To verify the contents of a hopper, follow these steps:
1 After logging on the Service Unit Screen, select a coin hopper icon.
2 Prepare a bag or bucket to collect the coins, if necessary.
3 Tap Verify, and then tap Start.
The coin hopper is emptied.
4 When coin hopper is empty, tap Stop
5 If the amount is correct:
▪ Tap Stop. Ending Bank Unchanged appears in the instruction box. No receipt is printed.
6 If the amount is not correct:
▪ Tap Edit, and then enter the correct amount.
▪ Enter the total number of coins, not the dollar amount. The system will calculate the dollar
amount for you.
▪ Tap Stop to finish.
▪ Ending bank has been adjusted by… appears in the instruction box.
▪ Take the receipt.
To Next Page
Loading...