Auto Sentry® flex User Manual 123 Marketing with your Auto Sentry
Figure 87. Video Clips Enabled
Enabling Welcome Videos and Damage Waivers
To enable a welcome video or damage waiver, follow these steps:
1 After you have recorded the file, name it as follows:
▪ For a welcome video, name the file CustomAdvertise.avi.
▪ For a damage waiver video, name the file DamageWaiver.avi.
2 Save the file here:
▪ \ICS\AVIFiles
3 Restart Touch.exe. to enable the video.
NOTE: Except for the size, the specifications for welcome videos and damage waivers are the
same as the specifications for promotional clips. Promotional clips are 352 by 288 pixels.
Welcome videos and damage waivers are 720 by 480 pixels.
For more information, see “Video Clip Specifications” on page 121.
Using Profiles and Schedules
A profile can be a group of base washes with their extra services. A profile can be enabled or
disabled at the Auto Sentry® flex. Profiles can be set up based on certain times or days of the week.
For example, you might create a profile that includes your base washes for your wash when you
have busy times of operation. Then, you might also create a profile for a promotion to encourage
To Next Page
Loading...
General