ICS Auto Sentry flex - Configure Coin Acceptor to Accept Tokens

Auto Sentry® flex User Manual 145 Marketing with your Auto Sentry
Figure 107. Please Take Coins Below Custom Graphic
Figure107, the sale of a $13.00 Xtreme Wash is complete. Before the customer is instructed to
drive ahead, a token is dispensed. A reminder message to take the coins is displayed.
Configure Coin Acceptor to Accept Tokens
You can accept Tokens as Part of a Promotion with the Auto Sentry® flex. To configure the Auto
Sentry® flex to accept token coins, follow these steps:
1 Open WashConnect
®
2 On the System Setup menu, click Devices, and then click Settings.
NOTE: To enable changes, after making changes in the Settings tab, you must remember to
restart Touch.exe software on the corresponding Auto Sentry® flex terminal.
3 In the Device Type box, select Auto Sentry
®
.
4 In the Device Name box, select the Auto Sentry
®
that will accept tokens.
5 In the Settings box, select Coin Acceptor.
Figure 108. Auto Sentry
®
Coin Acceptor Settings
6 In the Value box, select True if you want the coin acceptor to take more than one token per
transaction. Select False if you want the coin acceptor to take only one token per transaction.