ICS Auto Sentry flex - Figure 72. Service Unit Screen Users Site ID; Figure 73. Enter PIN

Auto Sentry® flex User Manual 95 Service Unit Screen
Figure 72. Service Unit Screen User’s Site ID
4 Select a Site ID, which is typically a four-digit number such as 1002.
Figure 73. Enter PIN
NOTE: If the User’s site is not listed, the user will need to change to their site first, and then enter
their User ID.
5 Tap the Edit button.
6 In User’s Site ID box, type the Site ID first, and then the UserID and PIN.
USER ID/PIN