Auto Sentry® flex User Manual 96 Service Unit Screen
7 Log on with your user ID and four-digit PIN, and then tap Enter. To access the Auto Sentry® flex®,
your user PIN must be numeric. An alphanumeric PIN is not accepted.
NOTE: The PIN is set up from the Users menu, in the Manage Users dialog box in
WashConnect®.
Bill Dispenser Group.
For units that include a multi-denomination dispenser.
▪ Each bill dispenser shows the assigned denomination, for
example, $1.00, and the current amount, 50, within the
dispenser.
Coin Hoppers.
▪ Coin and token hoppers show the assigned denomination,
for example, $1.00, and the current amount, for example,
50, within the coin hopper.
Reset.
Typically used if the bill dispenser is jammed. Also for coin hoppers.
▪ Tap the bill dispenser or coin hopper icon.
▪ Tap the Reset button. A reset command is sent to the
device. Message Sent To Reset … appears in the
information box.
Bill Acceptor, Coin Acceptor, Commands.
▪ Bill and coin acceptor shows the total amount (top line) and
number (bottom line) of bills and coins received.
▪ Command buttons include Add, Remove, Verify, Start,
Stop, and Edit.
To Next Page
Loading...