Auto Sentry® flex User Manual 115 Marketing with your Auto Sentry
In the previous figure:
In the Sales Item dialog box, PLU 5 is shown. The BMP File box contains Fullserv, which is a
reference to the custom button file name. Including a file name in this box enables the custom
button.
PLU 5 is part of the Day profile with one other base wash. Since there are two services in the
profile, the extra-large (X) size custom button is required. The number of services in the profile
determines the required size of the custom buttons. The BMP file name must contain the size
suffix or the button will not work.
The FullservX.bmp file is located in the
ICS/BMPFiles/Primary/Custom directory. It will be used whenever PLU 5 is part of the
active profile at the Auto Sentry® flex. The bmp will only be used if there are two or more wash
services or extra services. This extra large size is also used if you have only one extra service in
the profile. No wash buttons are needed at all if you only have one wash service since the
customer does not get to choose.
The custom button appears on the Auto Sentry® flex touch-screen, along with another custom
button and associated Info buttons.
Sizing Custom Buttons
Each custom button will be replicated in four different sizes with the respective suffix in the file
name for availability as needed:
Extra Large—X
Large—L
Medium—M
Small—S
The following table contains specifications for each button size.
NOTE: If you only have one wash service to offer customers, the Auto Sentry® flex will forward
you to the extra services screen or to the insert payment screen. This is why there is no
extra large button for only one wash service.
To Next Page
Loading...
General