Auto Sentry® flex User Manual 55 Operating
make a selection by tapping one of the two buttons before moving forward with the
transaction: Join Wash Club or No Thank You. ICS does not support the None Club Sell
Style.
Figure 39. “None” Club Sell Style Screen
Renew Club Memberships at the Terminal
The system supports ONE of the following club membership renewal options:
▪ Renew existing clubs only – allows customers to renew the membership for the club they
were previously enrolled. Customer cannot change into a different club during renewal
with this option.
-or-
▪ Renew membership from club list – allows customer to select the club from a list of clubs
offered. The club they are currently a member of may or may not exist in this list. It will exist
only if you sell the club at the terminal.
For renewal of membership for existing clubs only, follow these setup instructions:
1 On the System Setup menu, click Devices, and then click Settings.
The Settings dialog box appears.
2 In the Device Type box, select Auto Sentry.
3 In the Device Name box, select the name of the device from the list.
4 In the Settings Type box, select TouchConfiguration.
5 In the Settings box, select Clubs.
6 From the Clubs Self Renew, select True.
7 From the Clubs Renew Existing Program, select True.
To Next Page
Loading...
General