Auto Sentry® flex User Manual 69 Operating
issued to authorized users. Those cards contain unique code numbers which are accepted at the
Auto Sentry® flex. The fleet account cards are optionally secured with a PIN. The customer enters
the Fleet Card PIN number by tapping the numbers on the on-screen keypad. Next, the card is
approved and then the wash is charged to the fleet account.
In WashConnect®, Fleet account numbers are assigned to customers, and 4-digit passwords can be
setup from the Fleet menu for each Fleet Card. Fleet wash selections are set up in the Fleet Profile
with a valid time Schedule, and then enabled.
In Figure47, a customer swiped a fleet card and then is required to enter a PIN. After the customer
touches Buy Wash, he receives no wash menu—only the Basic Wash for $5.00 which is the
limitation configured in this fleet profile. However, fleet accounts do not need to be restricted to a
single wash choice. You could offer fleet customers two or three wash offerings to a full menu
selection as it appears for regular, non-fleet customers. Each Fleet Account can be set up with
To Next Page
Loading...
General