AFL-xxx-9103 Panel PC
Page 87
1
PIO mode 1 selected with a maximum transfer rate of
5.2 MB/s
2
PIO mode 2 selected with a maximum transfer rate of
8.3 MB/s
3
PIO mode 3 selected with a maximum transfer rate of
11.1 MB/s
4
PIO mode 4 selected with a maximum transfer rate of
16.6 MB/s
(This setting generally works with all hard disk drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)
DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Auto DEFAULT
BIOS auto detects the DMA mode. Use this value if the
IDE disk drive support cannot be determined.
SWDMA0
Single Word DMA mode 0 selected with a maximum
data transfer rate of 2.1 MB/s
SWDMA1
Single Word DMA mode 1 selected with a maximum
data transfer rate of 4.2 MB/s
SWDMA2
Single Word DMA mode 2 selected with a maximum
data transfer rate of 8.3 MB/s
MWDMA0
Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2 MB/s
MWDMA1
Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3 MB/s
MWDMA2
Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6 MB/s
To Next Page
Loading...
Need help?
General
