Intec CS4000 - Page 111

- 212 - - 213 -
Setting the network from the web browser Setting the network from the web browser
5
1
2
4
3
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
13
Enter the CA certicate le name, and
click [OK].
Memo
z
The imported CA certicate is the authenticator
certicate issued by the RADIUS server certicate.
z
Importable le formats are PEM, DER, and PKCS#7
formats.
The CA certicate will be imported to the
device.
14
Click [Submit].
15
The settings will be save in the printer,
and the network functions will restart.
If the standby screen is displayed in the
control panel, turn OFF the device power
supply.
Reference
z
For how to turn OFF the power supply, see "Basic".
z
Go to “Connecting the device to the authentication
switch” (P.213).

Connecting the device to the
authentication switch
Memo
z
Check that the device power supply is turned OFF.
1
Insert the LAN cable into the device
LAN (network) interface connector.
2
Insert the LAN cable into the
authentication switch authentication
port.
3
Turn ON the device power supply.
4
Check that the standby screen is
displayed in the control panel.
5
Set the device IP address according to
the environment in use.

Using EAP-TLS
4
Select [Enable] in [IEEE802.1X].
5
Select [EAP-TLS] in [EAP Type].
6
Enter the user name in [EAP User].
7
Enable the [Not use SSL/TLS Certicate
for EAP authentication] check box.
8
Click [Import of Client Certicate].
The "Import of Client Certicate" screen will
be displayed.
9
Enter the client certicate le name.
Memo
z
The importable certicate le format is PKCS#12.
10
Enter the client certicate password,
and click [OK].
The client certicate will be imported to the
printer.
11
Enable [Authenticate Server].
12
Click [Import of CA Certicate].
Memo
z
If [Not authenticate Server] is enabled, it is not
necessary to import the CA certicate.
If [Not authenticate Server] is enabled, disable
whether or not to connect to the correct
authentication server.
The "Import of CA Certicate" screen will be
displayed.