Intec CS4000 - Page 23

- 42 - - 43 -
Printing on various papers Printing on various papers
4
1
2
3
5
4
1
2
3
5
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
(5)
Select [X Dimension], and press
the [OK] button.
(6)
Press the scroll buttons or
to select a suitable size, and then
press the [OK] button.
(7)
Check that is displayed to the
left of the selected size, and press
the [BACK] button.
(8)
Select [Y Dimension], and press
the [OK] button.
(9)
Press the scroll buttons or
to select a suitable size, and then
press the [OK] button.
(10)
Check that is displayed to the
left of the selected size, and press
the [BACK] button.
(11)
Set the paper type and paper
weight as necessary.
(12)
Press the [ON LINE] button to
return to the standby screen.
4
Register the desired paper size in the
printer drivers to print.
1
Set the paper.
Memo
z
You can print by manually feeding one page at a
time from the Multi-Purpose Tray. For details, see
“Printing single sheets manually” (P.74).
z
For how to set the paper for the custom-sized tray,
see “Printing from the Custom-Sized Tray” in the
User’s Manual (Basic).
Setting in the Multi-Purpose Tray
ABC
Setting the paper
orientation
Setting in the paper tray
Setting the paper
orientation
2
If outputting to the face-up stacker,
open the face-up stacker.
Set the print surface face-up to output.
Memo
z
You can output to the face-down stacker.
Face-up stacker
3
Set the paper size and paper type using
the control panel.
(1)
Press the [Fn] key.
The numerical values input screen
will be displayed.
(2)
Enter a number according to the
paper to be used.
z
Using the Multi-Purpose Tray
Press [9], [0], and press the [OK]
button.
z
Using tray 1
Press [1], [0], and press the [OK]
button.
(3)
Select [Custom], and press the
[OK] button.
(4)
Check that is displayed to the
left of [Custom], and press the
[BACK] button.