Intel FALCON 8+ Flight Manual

LIMITATIONS
© 2017 Intel Corporation. All rights reserved. 19
REV 00
APR 2017
2.7.1 Minimum Crew Requirement
Minimum crew is one Remote Pilot in Command (RPIC).
The Remote Pilot normally programs the flight plan and operates the controls of the aircraft
during normal, manual, and non-normal operations.
Intensive training of every Remote Pilot to operate the UAS in all flight modes is mandatory.
Training is provided by authorized training providers; contact an Intel Corporation
representative.
The Visual Observer (VO) is responsible for monitoring area of operations for airborne,
environmental hazards, and for ground-based hazards.
Supplemental Remote Pilot
The crew may include a Supplemental Remote Pilot, but the Supplemental Remote Pilot is not
considered minimum crew. The Supplemental Remote Pilot performs the same flying duties of
the Remote Pilot under the direction of the Remote Pilot in Command. Only one Remote Pilot
in command is allowed.
Note: The Remote Pilot may not act as the Visual Observer.
Note: The Supplemental Pilot may not act as the Visual Observer.
WARNING: DO NOT FLY WHEREVER A FLAMMABLE GAS OR VAPOR HAZARD EXISTS AS
ELECTRICAL SPARK MAY IGNITE VAPORS.
CAUTION: DO NOT FLY IN A HIGH ELECTROMAGNETIC ENVIRONMENT AS IT MAY CAUSE
SYSTEM MALFUNCTION

Intel FALCON 8+ Specifications

General

Type	Octocopter
Easy to use	Yes
Product color	Black, Yellow
Maximum speed	16 m/s
Frequency band	2.4 GHz
Number of rotors	8 rotors
Maximum flight time	26 min
Maximum weight capacity	2.8 kg
Maximum operating distance	1000 m
Maximum pitch angular velocity	50 °/sec
Operating temperature (T-T)	-5 - 40 °C
Transmitter power consumption	100 mW
Built-in processor	-
Moving control functions	Backward, Forward, Turn left, Turn right, Upward

Weight and Dimensions

Depth	817 mm
Width	768 mm
Height	160 mm
Weight	1200 g
Rotor diameter	203.2 mm