MAINTENANCE MANUAL
INTEL
®
FALCON™ 8+ UAS
DESCRIPTION
76 © 2017 Intel Corporation. All rights reserved.
REV 00
APR 2017
There are different connectors on the back of the Intel
®
Cockpit GCS:
USB Ports
o Gamepad – Can only be used to connect the Independent Camera Control (ICC) and
to perform firmware updates from a USB stick.
o USB 1
o USB 2
o USB 3
Other USB ports can be used to connect USB sticks with preplanned flight
missions to be imported.
o HDMI Port
A headphone port (mini jack) is located on the lower right hand side of the Intel
®
Cockpit GCS
Before placing headphones or earphones near the ear
1. Find a quiet environment
2. Turn the volume down on this product to the minimum setting
3. Connect the earphone or headphone to the product
4. Place the earphone or headphone near or on the ear
5. Slowly increase the volume on the product to a comfortable level.
Avoid increasing the volume above this level. Increasing the volume to be louder than a noisy
environment, such as a city street, may exceed safe listening levels. If discomfort or buzzing is
experienced, reduce the volume or discontinue use of earphones or headphones.