USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2018 Intel Corporation. All rights reserved 107
Loading an Existing Project
Tapping on Load Project in the
PATH PROJECT window (see above),
opens the window PATH PROJECT -
LOAD
. In this window, you can select/
load an already stored project, with
recorded waypoints, to be edited and/or
flown, from an USB stick.
The USB stick must be inserted at the
back of the CTR.
Tapping on the project name, in the left
side window, highlights it and shows the
related data.
Tapping on the check mark, in the
lower right corner opens the
selected project (see next image).
Tapping on this button in the lower
left corner brings you back to the
last screen.
In the lower right corner of the window,
the UAV is indicated by an arrowhead
with its actual orientation, Height and
Distance if there is a connection
between the UAV and the CTR.
Figure 3.4: The Cockpit Control Application and PATH Projects (continued)
To Next Page
Loading...
