Chapter 12: Recording
TruVision NVR 11 User Manual 101
Motion detection will also not be recorded if it is not enabled (see “Motion detection” on
page 76).
Define a schedule from the recording schedule window
To set up a daily recording schedule:
1. From the menu toolbar, click Recording > Recording Schedule.
2. Select a camera.
3. Select the Enable Recording checkbox to indicate that video from this camera is to
be recorded.
4. Click a recording type in the legend to activate that record type. The cursor changes
to a pen, and a yellow box appears around the schedule map and selected
recording type.
5. Drag the pen cursor across desired hours and days in the schedule overview to
mark those times with that specific record mode. To mark areas with a different
record type, click on a different record type to activate it.
Note: You can schedule up to eight time periods in a day.
6. Click Apply to save the settings and Exit to return live view.
Define a schedule from the Edit menu
To set up a daily recording schedule:
1. From the menu toolbar, click Recording > Recording Schedule.
2. Select a camera.
3. Select the Enable Recording checkbox.
4. Click Edit. The following window is displayed:
To Next Page
Loading...
Need help?
General
