Chapter 2: Physical installation
TruVision NVR 11 User Manual 9
Items shipped with the product include:
• IR (infrared) remote control
• Two AAA batteries for the remote control
• AC power cords
• 12 VDC or 48 VDC PSU (depending on model)
• USB mouse
• NVR
• Rack mounts (8 and 16-channel models only)
• CD with software and manuals
• TruVision NVR 11 Quick Start Guide
• TruVision NVR 11 User Manual (on CD)
• TruVision Recorder Operator Guide (on CD)
Back panel
The figures below show the back panel connections and describe each connector on a
typical TVN 11 digital video recorder. Details may vary for specific models.
Before powering up the recorder, connect the cameras and a main monitor for basic
operation. Once all required connections are done, enter the relevant data in the setup
wizard (see page 15).
Note: For every hardwired alarm input, connect one wire to the input connection with
the alarm number label and one wire to a Ground connection (labeled G).