Chapter 5: Live view
TruVision NVR 11 User Manual 29
The system status is displayed on the front panel by the status LEDs.
Video output
The recorder has one HDMI and one VGA port.
The recorder automatically checks the monitor outputs used on startup. For the 8- and
16-channel recorders, the HDMI and VGA monitors can be set as the main or event
monitor.
The event monitor is used to display detected events such as motion.
Note: There is no event monitor for the four-channel recorder. When an event occurs, it
appears in full-screen mode on both monitors.
Only one monitor can be controlled at a time.
Live view mouse menu
Many features of live view can be quickly accessed by placing the cursor on a live
image and clicking the right-button of the mouse. The mouse menu appears (see
Figure 14 below).
Note: The 4-channel recorder has the same mouse menu except there is no monitor
selection option.
Figure 10: The mouse menu (8- and 16-channel recorders shown)
See Table 6 on page 30.
To Next Page
Loading...
Need help?
General
