Chapter 7: Playback functionality
TruVision NVR 11 User Manual 53
4. Click Play to see the desired snapshot.
5. Click Exit to return to the previous window.
Digital zoom in playback
You can zoom in on an image during playback to see it in greater detail. There are two
ways to perform digital zoom in playback.
To digitally zoom-in during playback:
1. In playback mode, click the time on the toolbar for the video that you want to view.
2. Click the Digital Zoom icon in the playback control toolbar.
The playback control toolbar disappears. The digital zoom window appears.
3. Left-click the mouse and drag the red square in the digital zoom window to the area
of interest. The selected area is magnified.
4. Right-click the mouse to quit digital zoom mode and return to full-screen playback
mode. The playback control toolbar reappears.
Create video clips
You can save important scenes in a recorded file for later reference by creating video
clips of selected portions of the file during playback. When an intruder, for example,
crosses in front of several cameras you can save the video clip of the intruder’s path
across these cameras in a single file.
Note: This feature is only available using the mouse.
To create video clips during playback:
1. Open the desired 24-hour playback window.
2. Click the playback timeline where you want the video clip to start and click the Start
Clipping button.
3. Click the playback timeline where you want the video clip to stop and click the End
Clipping button.
4. Repeat for additional clips.
5. Click the File Management button and click the Video Clips tab to see the list of
video clips saved. You cannot play them back.
To archive video clips, see “Archive video clips and locked files” on page 59”.
6. Click Cancel to return to 24-hour playback window.