Interlogix TruVision series - General Recorder Settings

Chapter 14: Device management
TruVision NVR 11 User Manual 121
General recorder settings
Use the General Settings menu of Device Management to configure general recorder
options.
See Figure 30 below for the general options available. The changes are immediately
implemented once Apply is clicked to save the settings.
Figure 30: General Settings of the recorder
Table 15: Description of the General Settings window
Option Description
1.
Language
Define the language of the system.
Select the desired language from the drop-down list and click Apply. The
language displayed changes immediately.
Default is English.
2.
Device Name
Define the recorder name.
Click the edit box and enter the new name from the soft keyboard. Default
is TVN 11.
3.
Remote Control ID
The device number to use for the recorder when linking the device to a
remote control. The default value is 255.
4.
Menu Timeout
Define the time in minutes after which the menu window reverts to live
view mode. Select a time from the drop-down list, and click Apply. Menu
timeout also applies to the system idle time after which a password will be
required.
Default value is 5 minutes.
5.
Enable HDMI/VGA
Simultaneous Output
8- and 16-channel recorders only:
Both HDMI and VGA monitors display the same content simultaneously.