Chapter 2: Physical installation
10 TruVision NVR 11 User Manual
Figure 1: Back panel connections TVN 1104cS and TVN 1104c
TVN 1104cS:
TVN 1104c: (EMEA only)
1. Connect a microphone for bi-directional audio
(not recorded).
2. Connect up to four alarm inputs
3. Connect one alarm relay output.
4. Connect to a network.
5. Power switch (on/off).
6. Embedded PoE ports to connect IP cameras
(4).
7. Connect to speakers for audio output.
8. Connect to a VGA monitor.
9. Connect to an HDTV. The HDMI connection
supports both digital audio and video.
10. Connect to an optional USB 2.0 device such
as a mouse, CD/DVD burner or HDD.
11. Connect to the 48 VDC PSU (included)
(depending on model)
12. Connect to ground.
13. Connect to the 12 VDC PSU (included)
To Next Page
Loading...
