Intermec EasyCoder PM4i User Manual

Appendix A — Technical Data
EasyCoder PM4i Printer User’s Guide (Fingerprint Version) 125
Firmware
Operating System Intermec Fingerprint
v. 8.70
Includes Direct
Protocol
Smooth Fonts Tr ueD o c and
TrueType fonts
Resident scaleable
fonts
15 Unicode fonts
Resident bar codes 59
Startup Program (std) Intermec Shell v8.2
Physical Measures
Dimensions (W × L × H) 298 × 543 × 261 mm
(11.7 × 21.4 × 10.3 in)
13.5 kg (30 pounds)
+5°C to +40°C (+41°F to +104°F)
20 to 80% noncondensing
Weight (excluding media)
Ambient Operating Temperature
Humidity
Electronics
Microprocessor 32 bit RISC
On-board Flash
SIMMs
2 sockets for 4 MB or
8 MB each
Std. 1 x 4 MB
On-board SDRAM
SIMM
1 socket for 8 MB or
16 MB
Std. 8 MB
Power Supply
AC Voltage 90 to 265 VAC, 45 to 65 Hz
PFC Regulation IEC 61000-3-2
Power Consumption Standby 15W; Peak 300W

Intermec EasyCoder PM4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.5/8.7 mm
Maximum label width	114.3 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	15 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	543 mm
Width	298 mm
Height	261 mm
Weight	13500 g