ITW SIMCO ION Manager IQ Easy User Manual

ManagerIQEasy_UM_9752103002_GB_V3_1 117
Press “YES” to take over the parameters of the previous failed Device.
The screen will close and the settings will be copied to the Device. During this process, the
Device status will be displayed as / (Busy). When copying the settings is complete,
the status will change to / (Running) or / (Standby) mode.
6.29.3 There is no longer any information from the defective Device available for the
Manager IQ Easy.
In the worst case scenario, the information of the defective or removed Device is no longer
stored in the memory of the Manager IQ Easy and also not on the system (see Section 6.28.3).
In this case, all settings of the new Device will have to be adjusted manually.

ITW SIMCO ION Manager IQ Easy Specifications

General

Brand	ITW
Model	SIMCO ION Manager IQ Easy
Category	Control Unit
Language	English