ManagerIQEasy_UM_9752103002_GB_V3_1 78
6.18.5 Disconnecting a Sensor Device from a bar (Expert user)
To be able to disconnect linked Devices, you must at least become an Expert user (see Section 6.8).
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Device) of the Device to be disconnected.
If necessary, press (Information) to go to the Information screen.
Browse using the and buttons to the page with parameter “Paired device” or
“Paired devices” (This depends on the support capabilities of the Device. It is also possible
to use the large non-visible areas to browse.)
Click (EditMode) to change the parameter.
Press (Edit) after the “Paired device” or “Paired devices” parameter. A screen will open
that looks like this.
Select the button of the Device to be disconnected (In the example, “Performax IQ Easy 1”
is selected).
To Next Page
Loading...
Need help?
General