ManagerIQEasy_UM_9752103002_GB_V3_1 67
6.17.10 Setting the Run state display colour green (Expert user)
As explained in Section 6.5.1 and 6.7, the Manager IQ Easy has 2 modes on which the Standby
and Running status colours can be displayed.
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info). The (Information) screen of the HMI will now open.
Browse using the and buttons to the page with the parameter “Run state display
colour green” (You can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Run state display colour green” parameter.
The following screen will be opened.
Select “No” to display the status colour for Standby as green and Running as blue.
Select “Yes” to display the status colour for Standby as blue and Running as green.
The screen will now close.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
To Next Page
Loading...