ManagerIQEasy_UM_9752103002_GB_V3_1 61
6.17.4 Setting a password for the ‘Advanced user’ user level
If necessary, go to the main screen (Home).
If necessary, log in as or (Userlevel, Advanced/Expert), see Section 6.9.
Press (Info). The (Information) screen of the HMI will now open.
Browse using the and buttons to the page with parameter “Advanced password”
(You can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Advanced password” parameter. A keyboard will now become active.
Enter the (new or current) password. The password can be made visible while typing by
pressing (Show). Press (Hide) to hide the password again.
Press (Accept) to save the password.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
To Next Page
Loading...