ITW SIMCO ION Manager IQ Easy - Setting the Fieldbus Network Parameters Without Using a DHCP Server

ManagerIQEasy_UM_9752103002_GB_V3_1 122
Then, at “Hostname”, enter a recognisable name such as “IQ-Easy”.
Click on “Set” to apply the settings.
To make the settings also visible on the Manager IQ Easy, the Manager IQ Easy must be restarted.
6.31.2.2 Setting the Fieldbus network parameters without using a DHCP server.
At “DHCP”, select the option “Off” to enter the IP address for the Fieldbus dongle yourself.