ManagerIQEasy_UM_9752103002_GB_V3_1 71
6.18.2 Linking a Sensor Device to a bar (Expert user)
To link 2 or more Devices together, you must at least be logged in as an Expert user
(see Section 6.8).
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Device) of the Device to be connected.
If necessary, press (Information) to go to the Information screen.
Browse using the and buttons to the page with parameter “Paired device” or
“Paired devices” (This depends on the support capabilities of the Device. It is also possible
to use the large non-visible areas to browse.)
Click (EditMode) to change the parameter.
Press (Edit) after the “Paired device” or “Paired devices” parameter. A screen will open
that looks like this.
Select button “None” to add a new Device, or select one of the Devices already assigned to
change it.
To Next Page
Loading...