ManagerIQEasy_UM_9752103002_GB_V3_1 89
6.20.2 Enabling and disabling Sensor segments via the Graphics screen (Expert user)
Segments can also be enabled and disabled via the Graphics screen. For this, the user must be
logged in as an Expert (see Section 6.8).
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Device) of the Device.
If necessary, press (Graphics) to go to the Graphics screen.
Press (Edit) to open the “Enabled segments” screen.
Enable or disable the desired segments by pressing the corresponding segment button.
Press (Accept) to save the changes made.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
To Next Page
Loading...