ManagerIQEasy_UM_9752103002_GB_V3_1 92
6.21.1 Switching on the system configuration check for the first time (Expert user)
Note:
- Connect all Devices and put the Devices in the desired Running mode.
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info).
Browse using the and buttons to the page with the parameter “Check last
configuration” (You can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Check last configuration” parameter.
Go back to the main screen (Home).
After a while the following screen will appear.
Press “YES”. The screen will close and the active System Configuration will be saved.
Log in again as Basic user (see Section 6.9).