ITW SIMCO ION Manager IQ Easy - Re-Enabling System Configuration Check (Expert User)

ManagerIQEasy_UM_9752103002_GB_V3_1 95
6.21.4 Re-enabling System Configuration Check (Expert user)
It may be desirable to re-enable the System Configuration Check. To do so, set the HMI setting
“Check last configuration” to “Yes”. See Section 6.12 to access this setting.
Note:
- The last saved System Configuration will be saved on the Manager IQ Easy. When re-enabling
the System Configuration Check, the Manager IQ Easy will thus use this configuration. If the
configuration has been changed in the meantime, Section 6.21.2 describes how to save the
modified configuration.