ManagerIQEasy_UM_9752103002_GB_V3_1 11
5 Systems
Warning:
- The electrical installation must be carried out by an electrical engineer with the
relevant training and qualifications.
- Disconnect the power supply before carrying out any work on the unit.
- Consult the manuals of the Device to be connected for proper and safe connecting
and use of the Device.
5.1 Checks
- Check that the equipment is undamaged and that you have received the correct version.
- Check that the packing bill data matches the data of the product received.
- Check whether the voltage shown on the rating plate corresponds to the mains voltage you
intend to use.
If you have any problems or are unsure, please contact Simco-Ion or your regional agent.
5.2 General
Place the Manager on a well visible and easily accessible place on or nearby the machine.
5.3 Fitting the Manager IQ Easy
The Manager IQ Easy can be placed on a flat surface or mounted in a machine panel.
Figure 4, Removal of the plastic bottom cover Manager IQ Easy and Extension IQ Easy.
To Next Page
Loading...