ManagerIQEasy_UM_9752103002_GB_V3_1 43
6.12 Changing a parameter
To go to the HMI, Backplane, Extension IQ Easy or Device parameter screen, do the following:
Press (TabM) and press (Info) within 1 second.
Press the relevant tab: (Tab1), (Tab2), (Tab3) or
(Tab4), and press the (Info) button within 1 second.
Press the icon of the Device , , or .
In the following example, the HMI parameter screen is open. Browse to the desired page using
the and buttons. It is also possible to use the large non-visible areas to browse.
Click (EditMode) to change the parameter.
The tab (Information) has been changed to (Settings) and next to the
parameters that can be adjusted, there is a button visible.
To Next Page
Loading...