ManagerIQEasy_UM_9752103002_GB_V3_1 8
3 Safety
The following safety guidelines must be observed in order to prevent physical injury and
damage to objects or the Manager IQ Easy itself.
Warning:
- Electrical installation must be carried out by a qualified electrician in accordance with
national and local regulations.
- The Manager IQ Easy must not be used in any environment where there are fire or
explosion hazards.
- The Manager IQ Easy must not be exposed to vibrations or shocks.
- Use the Manager only in combination with matching Simco-Ion equipment.
- Also read the manual of the equipment to be connected before commissioning.
- The Manager IQ Easy is not intended as a safety component in machines.
- Do not install the manager in dirty, damp or any other areas in which chemicals or other
corrosive materials are used.
Danger:
- Make sure that the equipment is properly earthed. Earthing is necessary to ensure proper
and safe operation and to prevent electric shocks upon contact.
The AC version is earthed through the power cable. Plug this into an earthed outlet.
With the 24 V DC version, the earthing connector of the 24 V power connector has to be
connected to the machine earthing or an earthed machine part.
- To guarantee safe operation, keep the Manager IQ Easy free of dirt, dust and moisture.
- The Device may only be serviced by qualified Simco-Ion staff.
Note:
- Making changes, adjustments etc. without prior written consent or carrying out repairs using
non-original parts will invalidate the Device’s guarantee.
Except for the 230 AC input connector, all connectors for the Devices and various I/O have
signals that are working on a safe 24V DC.
That is why all these inputs and outputs can be connected and disconnected safely while the
Manager IQ Easy is operating.
To Next Page
Loading...
Need help?
General