ITW SIMCO ION Manager IQ Easy - Setting the Date Display ((Expert User))

ManagerIQEasy_UM_9752103002_GB_V3_1 60
6.17.3 Setting the date display ((Expert user))
The date can be displayed on the screen in different ways (Dutch, American and German
formats). To adjust this setting, the user must be logged in as Expert (see Section 6.8).
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info). The (Information) screen of the HMI will now open.
Browse using the and buttons to the page with the parameter “Date format”
(You can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Date format” parameter. The following screen will be opened.
Select the desired display format. The screen will now close.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).