ManagerIQEasy_UM_9752103002_GB_V3_1 59
6.17.2 Setting the system time (Expert user)
To set the clock of the HMI, the user must be logged in as Expert (see Section 6.8).
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info). The (Information) screen of the HMI will now open.
Browse using the and buttons to the page with the parameter “Date/time”
(You can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Date/time” parameter. The following screen will be opened.
Use the and buttons to set the date and time correctly.
Press (Accept) to save the newly set date and time.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
Note:
- The IQ Easy system does not switch between summer and winter time. You must set the
clock yourself.
To Next Page
Loading...
Need help?
General