ManagerIQEasy_UM_9752103002_GB_V3_1 62
6.17.5 Setting a password for the ‘Expert user’ user level
If necessary, go to the main screen (Home).
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info). The (Information) screen of the HMI will now open.
Browse using the and buttons to the page with parameter “Expert password” (You
can also use the large non-visible areas to browse).
Click (EditMode) to change the parameter.
Press (Edit) after the “Expert password” parameter. A keyboard will now become active.
Enter the (new or current) password. The password can be made visible while typing by
pressing (Show). Press (Hide) to hide the password again.
Press (Accept) to save the password.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
To Next Page
Loading...