ManagerIQEasy_UM_9752103002_GB_V3_1 107
6.25 Backing up system parameters to USB (Expert user)
The IQ Easy system has the possibility to back up the complete system configuration and all settings
and parameters of the system including all connected Devices on a USB stick and thus to make
them safe for a possible recovery.
In preparation, a USB stick must be emptied and the folder “Update” must be created in the root
folder. This prevents all existing log files from being copied to the USB stick first.
If necessary, go to the main screen (Home).
Place the prepared USB stick in one of the USB slots.
The system will now display the following message “USB IS UPDATE USB”.
Press “OK”.
If necessary, log in as (User level, Expert), see Section 6.9.
Press (Info).
If necessary, press (Maintenance) to go to Maintenance screen.
Browse using the and buttons to the page with the Action “Save HMI settings” (You
can also use the large non-visible areas to browse).
Press (Action) after Action “Save HMI settings”. After a short while the following screen
will appear “Config files copied.”.
To Next Page
Loading...