ITW SIMCO ION Manager IQ Easy User Manual

ManagerIQEasy_UM_9752103002_GB_V3_1 70
If necessary, browse using the and buttons to the page with the Sensor Device to
which the bar is to be linked.
Now press the button for the Sensor Device to be paired.
The selection screen will close and the parameter and settings screen will be displayed with the
adjustment made.
Press (Home) to return to the main screen and log in again as a Basic user (see Section 6.9).
Note:
- The Manager IQ Easy will attempt to establish the link in the Sensor Devices automatically.
It is good to check in the Sensor Devices whether this has actually been achieved. If it did
not go well, the link in the Sensor Devices will then have to be made manually.
Then check whether the links were also made in the Sensor Devices. This will be described in
the following section.

ITW SIMCO ION Manager IQ Easy Specifications

General

Brand	ITW
Model	SIMCO ION Manager IQ Easy
Category	Control Unit
Language	English