ITW SIMCO ION Manager IQ Easy User Manual

ManagerIQEasy_UM_9752103002_GB_V3_1 3
6.27.2 Searching manually for Extension IQ Easy units. ................................................................................................... 112
6.28 Disconnecting a Device (Expert user) ................................................................................................ 113
6.28.1 Device disconnected notification. ......................................................................................................................... 113
6.28.2 Restoring a disconnected Device........................................................................................................................... 114
6.28.3 Removing the Disconnected Device from the IQ Easy system. ............................................................................. 115
6.29 Replacing a defective Device (Expert user) ........................................................................................ 116
6.29.1 The Device information is still available in the memory of the Manager IQ Easy. ................................................ 116
6.29.2 The Device information is stored on the system. .................................................................................................. 116
6.29.3 There is no longer any information from the defective Device available for the Manager IQ Easy. .................... 117
6.30 Calibrating a bar (Expert user) .......................................................................................................... 118
6.31 Fieldbus settings (Expert user) .......................................................................................................... 119
6.31.1 Setting up the use of a DHCP server. ..................................................................................................................... 119
6.31.2 Setting the network parameters with IPconfig tool (ProfiNet and EtherNet/IP only). ......................................... 120
6.31.2.1 Setting the Fieldbus network parameters using a DHCP server. ........................................................................ 121
6.31.2.2 Setting the Fieldbus network parameters without using a DHCP server. .......................................................... 122
6.31.3 Setting the parameters “Domain name”, “Host name” (ProfiNet and EtherNet/IP only)................................................... 124
6.31.4 Setting the network Device name (ProfiNet only) ................................................................................................ 126
6.31.5 Setting the “Fieldbus Device ports” mapping parameter(s).................................................................................. 129
6.31.6 Setting the “Fieldbus smart sensor data msg” parameter .................................................................................... 133
6.31.7 Meaning of status LEDs Fieldbus module .............................................................................................................. 134
6.31.7.1 Meaning of status LEDs EthetNet/IP Fieldbus module ....................................................................................... 134
6.31.7.2 Meaning of status LEDs of the Profinet Fieldbus module .................................................................................. 135
6.31.8 Setting up PLC for fieldbus communication .......................................................................................................... 135
7 Functional check .......................................................................................................................... 136
7.1 Warnings ........................................................................................................................................... 136
7.2 Alarms ............................................................................................................................................... 136
7.3 Data logging (as of Software version V1.1.0 of the Manager) ............................................................... 136
7.3.1 Copying data from internal memory to PC .............................................................................................................. 137
7.3.2 Data logging to USB ................................................................................................................................................. 137
8 Maintenance ............................................................................................................................... 138
9 Solving malfunctions and problems .............................................................................................. 139
10 Repairs ...................................................................................................................................... 142
11 Scrapping .................................................................................................................................. 142
Spare parts ..................................................................................................................................... 143

ITW SIMCO ION Manager IQ Easy Specifications

General

Brand	ITW
Model	SIMCO ION Manager IQ Easy
Category	Control Unit
Language	English