106 Event V3 Manual
Advanced Features
15.50 Edit Page
15.51 Changing the Make-up of a Page:
It is possible to change the default make-up of a Page by using the Edit Page menu.
This menu is used to configure the make up of Pages so as to set how many
Memories will be included in a Page. The numerical increment between the first
Memory in each Page and whether Chases will automatically be loaded with each
Page, can be altered by this procedure:
Press the Edit button.
Press the Page button.
Move the cursor to the MEMS field.
Use the 1 (On)/2 (Off) button or keypad to enter the number of Memories
per Page (1 - 24).
Move the cursor to the INCR (Increment) field.
Using the 1 (On)/2 (Off) button or keypad to enter the number of the
increment between the first Memory in each Page.
Move the cursor to the CHS: (Chase) field.
Use the 1 (On) button to change from AUTO to OFF or vice versa. When
Auto is selected a Chase is automatically loaded to Assign Master 21 when-
ever a new Page is loaded. The Chase number corresponds to the Page
number.
Press the Exit key to return to the standard screen.
Diagram 15B/Examples 1, 2, 3
1
2
3
4
5
6
7
8
9
☞
To Next Page
Loading...
