28 Event V3 Manual
Creating Memories & Chases
7.12 METHOD 2: Using the Menu
Press the Memory button.
Use the Preset faders (and any other console controls) to set up the lighting
output required.
Enter the Memory number (0 - 999) to be recorded using the numeric keypad
or alternatively use the 1 (On)/2 (Off) buttons to change the displayed
Memory number.
Diagram 7B
NOTE: The cursor automatically moves to the Label field if a three digit number is
entered.
3
1
2
Press the Record button (a message displays on the LCD shows the per-
centage of available memory space that has been used and how much
remains).
Another Memory can now be recorded by repeating steps , and
(see Note below).
Press the Exit button if no more Memories are to be recorded.
4
5
6
NOTE: The number in the Memory menu automatically advances by 1 when the Record
button is released. This allows a number of Memories to be recorded without
leaving the Memory menu.
☞
2 3
4
To Next Page
Loading...
Need help?
General
