Jands Event Plus User Manual

Event V3 Manual 43
© Jands Electronics July 1995
8.70 Playing Back Chases
To see what is recorded so far, follow these steps:
1. Pull down all the Preset faders so you can see what has been recorded in the
Chase.
2. Check that you can see the Chase number or the label you gave it in the LCD
window above one of the Assign Faders.
3. Move the Assign fader to 100%.
(For more detail see Playback section Section 13.00)

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English