Jands Event Plus - Clearing a Stack; Clearing Chases

126 Event V3 Manual
Advanced Features
21.20 Clearing a Stack
This procedure is explained in the section on using Stacks (see Section 13.00).
21.30 Clearing Chases
Press the Clear button to open the Clear/Copy menu.
Move the cursor to the CHSE (Chase) field.
Note: Move the cursor to the FUNCTION: field and press the ON
(+) button to toggle the field from Copy to Clear if necessary.
Diagram 21B
1
Press the 1 (On) button to open the Clear Chase menu.
Move the cursor to the CHS: (Chase:) field.
Set the Chase number to be cleared (deleted).
Move the cursor to the TO: field.
Set the last of a range of Chase numbers to be cleared (deleted).
Move the cursor to the CONFIRM field.
Press the 1 (On) button to delete the Chase(s).
2
7
6
5
4
3
8
9
☞